Ul, Cul Standards - Mitsubishi Electric GT14 User Manual

5. UL, cUL STANDARDS AND EMC DIRECTIVE

5.1 UL, cUL Standards

UL, cUL Standard are recognized in use by the following combination.
<a>
• GT14HANDY (GT1455HS-QTBDE series, GT1450HS-QMBDE series)
*2
• GT16H-CNB-42S
• External cable (GT14H-C30-42P, GT14H-C60-42P, GT14H-C100-42P)
<b>
• GT14HANDY (GT1455HS-QTBDE series, GT1450HS-QMBDE series)
• GT16H-CNB-37S
• External cable (GT11H-C30-37P, GT11H-C60-37P, GT11H-C100-37P)
Cable must be properly installed and routed to ensure protection of the Cable.
*1 Hardware version B or later
*2 Hardware version D or later
*3 Version B or later
*4 Version D or later
POINT POINT POINT
Checking method of hard ware version.
Confirm the hardware version with the products rating plate.

General notes on Power supply
This equipment must be supplied by a UL Listed or Recognized 24V DC rated power supply and UL Listed or
Recognized fuse rated not higher than 4A, or a UL Listed Class 2 power supply.

Using GOT
GOT is for use on a Flat Surface of a Type 1 Enclosure.
MITSUBISHI ELECTRIC CORPORATION
5. UL, cUL STANDARDS AND EMC DIRECTIVE
*1
*3
*1
*4
AA
Hardware Version
5.1 UL, cUL Standards
1
2
3
4
5
6
7
8
5 - 1