Mitsubishi Electric GT14 User Manual page 283

Hide thumbs Also See for GT14:
Table of Contents

Advertisement

(d)
(e)
(f)
(g)
3.
Touch the [OK] button after all items are input, and
then the dialog box shown left is displayed and the
input operator information is added.
Touch the [Cancel] button or the
the dialog box shown left is displayed.
14. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
For changing passwords during editing, touch the
password.
The New password input dialog box is displayed,
and then input a password.
When the input is completed, touch the [Enter] key.
When the password input is completed, the New
password input confirmation dialog box is
displayed.
Input the same password.
For enabling the setting of [Make a permanent
password], touch the check box for [Make a
permanent password], and then the setting is
switched.
: Disabled
: Enabled
For using the external authentication ID, touch the
check box "Use ext. auth. ID" and switch the
setting.
: The external authentication ID is not used.
: The external authentication ID is used.
Touch Ext.auth ID to display the external
authentication ID input dialog box, and enter the
external recognition ID. When the input is
completed, touch the [Enter] key.
When the authentication method is set to
"Fingerprint auth" or "External auth (general)", the
external authentication ID can be input with the
external authentication device.
14.2 Various Data Control
9
10
11
12
13
14
15
button, and then
16
14 - 79

Advertisement

Table of Contents
loading

Table of Contents