(2) Set [Ordinary] to Observation Cycle in the Project tab and click [Add...].
(3) Set [ON] and [GB40] to Trigger 1 in the Trigger tab.
• Operation setting
Store the rotary switch value into the station No. switching device (GD500).
The station No. switching device value is an unsigned 16bits data where the upper 8bits are the network No. and
the lower 8bits are the PC No.
(1) Set [Data Set 16bit] to [Action] and [Unsigned BIN] to [Data] in the Action tab.
(2) Set a station No. switching device [GD500] to [Device].
(3) To set the rotary switch value of the connector conversion box, tick the check box of [Indirect] and click the [...]
button to display the Select CH No. window.
6. OPTION
6.6 Connector Conversion Box
1
2
3
4
5
6
7
8
6 - 21