Table of Contents
Advertisement
6.
Set the project data to use the station No. switching.
When [Screen]
[Screen Property...] is selected, the Screen Property dialog box is displayed.
Tick the check box of [Switch Station No.] in the [Basic] tab.
Perform this operation in all screens where the station No. is switched.
7.
Place objects on the screen.
Finally, place objects on the screen.
Select Host to the network device of the objects.
When the station No. switching device value is 0, the host is monitored.
The setting is completed with the above operations. Transfer the project data to the GOT and check the operation.
6. OPTION
6.6 Connector Conversion Box
1
2
3
4
5
6
7
8
6 - 23
Advertisement
Chapters
Table of Contents
