Applicable Sd Card - Mitsubishi Electric GT14 User Manual

Hide thumbs Also See for GT14:

Table of Contents

The SD card is used to transmit the OS or project data and to save the data of the alarm history function.

Refer to the following for details.

Applicable SD card

The following SD cards are applicable for GOT.

Some models with the operations checked by our company are usable.

For the operation-checked models, refer to "Operation Check Results of Third Party SD Cards on GT14 Model" (Hime-T-P-0089)

separately available, or contact your local distributor.

Installing and removing procedures of the SD card

Install/remove the SD card with the power supply of GOT is OFF or SD card access switch is "OFF".

environmental

protection cover

14. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)

SD memory card 2GB

SDHC memory card 4GB

Commercially-available SD card

access switch

Open the interface environmental protection cover

in the arrow-pointing direction.

Set the SD card access switch of the GOT to

"OFF", and make sure that the SD card access

LED turns off.

When the SD card access LED turns off, the SD

card can be installed even during the GOT power

Table of Contents