Electronic Key Counter) Function Setting; Key Sound - Konica Minolta 7165 Instruction Manual

[4] E.K.C. (Electronic Key Counter) Function Setting
This function can only be accessed by the Key Operator after a 8-digit EKC
master key code is entered. The Electronic Key Counter allows you to
monitor all copying activity by controlling EKC password accounts.
This feature can track copier usage for individual users and/or accounts as
well as limit access to the copier to authorized users. Copy quantity limits for
specific accounts can also be set. Use the EKC Key Operator Form provided
at the end of this section to record EKC password information.
The EKC stores up to 1,000 EKC passwords, each of which represents a
separate account that can be used for billing and recordkeeping. The
number of users assigned to each account may depend upon the billing
system in operation and the number of individuals and departments using
the copier. When the EKC is activated, copying can be performed only after
a valid EKC password is entered.
Copy quantity and copy limit for each account can be visually confirmed on
the screen.
If EKC needs to be activated on your machine, contact your service
representative.
The following EKC settings can be made:
[1] E.K.C. data edit:
Change, add, or delete EKC data, and reset the copy count of the individual
account.
[2] E.K.C. all count reset:
Clear the copy count for all accounts.
[3] E.K.C. function setting:
Select the EKC function to be on or off, and also set the machine condition
when the copy limit is reached to stop immediately or after a job is
completed, or to only display a warning message.
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.K.C.
Lock/Delete
Job Memory
Paper Type/
Special Size
Panel Contrast/

Key Sound

Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Power Save
Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Centre
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Scan
Transmission
Non-Image
Area Erase
13
Key Operator
Mode
13-15