Finisher; Trail Erase (Dup); Internet Isw - Konica Minolta bizhub 200 Service Manual

10. Tech. Rep. Mode
10.3.7

Finisher

A. Punch Stop Position
Functions • To adjust the paper stop position for punching.
Use • To adjust the punch position.
Setting/ See P.32 of the FS-508/PU-501/OT-601 service manual.
Procedure
B. Punch Loop Adjustment
Functions • To adjust the length of the loop for correcting skew during punching.
Use • To correct any skew in the punch position.
Setting/ See P.33 of the FS-508/PU-501/OT-601 service manual.
Procedure
10.3.8

Trail Erase (Dup)

• To set the adjustment value for the amount of erase on the trailing edge for 2-sided
Functions
printing.
• The amount erased at the trailing edge of the second side of a 2-sided print is the Trail-
Use
ing setting for Edge Erase + Duplex Trailing Erase setting.
Setting/ • The default setting is "2 mm".
Procedure • The adjustment range is 0 to 5 mm.
10.3.9

Internet ISW

2
• Unused
162
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006