Firmware Rewriting By The Internet Isw; Outline; Service Environment; Preparations - Konica Minolta bizhub 362 Service Manual

Field Service Ver. 1.0 Dec. 2008
5.3

Firmware rewriting by the Internet ISW

5.3.1

Outline

• [Internet ISW] is the system which gives the instruction for updating the firmware with the
CS Remote Care, so the main body will automatically receive the firmware from the pro-
gram server over a network for updating.
5.3.2

Service environment

The following conditions are necessary for using the Internet ISW function.
• The main body is connected to such a network environment that the firmware can be
downloaded on the internet using the ftp protocol.
The "Internet ISW" will not operate under the following conditions.
• Main power switch is set to OFF.
• Sub power switch is set to OFF.
• The main body has the job currently performing.
• Modes other than normal mode are used.
• Machine has a paper jam.
• The version of firmware provided from the program server and MFBS board on the
machine are not compatible with each other.
5.3.3

Preparations

• For details of each setting item, refer to ADJUSTMENT/SETTING "Internet ISW".
See P.164
A. Internet ISW
1. Call the Tech. Rep. Mode to the screen.
2. Touch [Tech. Rep. Choice]
3. Touch [Internet ISW]
4. Touch [Login name], and enter the login name which is necessary for connecting to the
program server on the on-screen keyboard, and touch [Enter].
5. Touch [Password], and enter the password which is necessary for connecting to the
program server on the on-screen keyboard, and touch [Enter].
6. Touch [Port Number], and set the port number for the proxy server from 1 through
65535.
7. Touch [Use Proxy], for connecting via proxy server, select [Enter].
8. Touch [Connection Timeout], set the time for the connection time out between 1 min
and 60 min.
9. Touch [Passive Mode] and, if connection through PASV (passive mode) is to be
enabled, select [Enable].
5. Firmware upgrade
A11UF3E501DA
45