Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1485

QoS Commands
output definitions (continued)
Max Depth
Packets Xmit/Drop
Type
Action
Release History
Release 6.6.1; command was introduced.
Related Commands
policy rule
OmniSwitch CLI Reference Guide
The maximum queue depth, in bytes. Configured through the
action maximum depth
The number of packets transmitted/dropped from this queue.
The type of queuing performed on this queue (pri, wrr, drr).
The action that created the queue. A second line displays parameters
specified by the action. The actions are as follows:
•
Default —Set up for traffic that does not match a condition on the
port.
•
Flood—Set up for flooded or broadcast traffic.
•
Best Effort—Set up for traffic that does not match a condition on
the VPN.
•
QOS—Created by the switch because the traffic matched a condi-
tion. When traffic matches a condition and queue is set up, another
line displays to show the parameters specified by the action corre-
sponding to the condition. An asterisk displays in fields where the
parameter was not specified by the action. In other words, the first
line shows what is actually happening in the queue; the second line
shows what the action specified.
Configures a policy rule on the switch. A rule is made up of a condition
(for classifying incoming traffic) and an action (to be applied to outgo-
ing traffic).
November 2009
command.
policy
page 38-57