Audit Events To Transfer - Hitachi Compute Blade 2000 User Manual

Audit events to transfer

Audit events are transferred when the events occur as operation logs. See
log for details.
Log format
The following format is used for logs transferred to the syslog server.
[date] [IP address for SVP or BMC] mm: auditevent,[log message]
An operation log is in [log message]. See
"user" is displayed as facility for logs transferred to the syslog server. For severity,
"notice" is displayed as the result in the operation log when an operation fails, and
"info" is displayed when the operation result is other than failure.
Using Syslog transfer
The following flowchart shows the procedure for using Syslog transfer.
(2) Setting Syslog transfer to management modules and BMC
1. Installing the Syslog server
Install a syslog server to transfer Audit events.
2. Setting Syslog transfer to management modules and BMC
Configure the following settings for the management module and BMC. For
management modules, see "ST Command" in Chapter 6; for server blades
(BMC), see "Syslog Transfer" in Chapter 5
Operation
(1) Installing the Syslog server
(3) Sending Syslog transfer test message
1767
Operation
for the format and messages.