Table of Contents
Advertisement
18
Call Back
A station can initiate a call back request to another busy station.
Once that station becomes idle, the station that left the call back
request is signaled.
To leave a Call Back request when a number is busy:
1.
Press the preprogrammed CALL BACK flexible button or use
the Soft Key's CALL-BK option.
2.
Replace the handset, or press the ON/OFF button. When the
busy station hangs up, you will be signaled.
3.
Answer the call; the station you called will then be signaled.
(If your station is busy when signaled, an automatic MSG will
be placed at your phone.) Only one Call Back request can be
left at a station; the second request will leave a message wait
callback request.
SINGLE LINE TELEPHONE
To leave a Call Back request when a number is busy:
1.
Press the FLASH button.
2.
Dial [622], then replace the handset.
STSe Station User Guide
When the Automatic Call Back Timer is enabled,
a call back request is automatically invoked
anytime you listen to a busy intercom tone for a
preset period of time (default = 10 seconds).
Only one Call Back request can be left at a
station; the second request will convert to a
message waiting request.
Call Back
August 2005
Advertisement
Table of Contents
