Table of Contents
Advertisement
2-74
Description
The system can be set to record all outgoing calls or only outgoing long
distance calls. Long Distance calls are defined as beginning with a 1 or 0,
or containing eight or more digits. Incoming calls are only recorded if
TYPE is set for all calls. By default, the system records long distance (LD)
calls only.
Character Print Assignment
Programming Steps
1. Press PRINT FORMAT flex button (FLASH 21, Button #3) to
2. Press HOLD to save the entry. A confirmation tone is heard.
Description
The system can be programmed to print individual SMDR records in
either a 1-line 80-character format or a 3-line 30-character format. By
default, the 1-line 80-character format is selected.
Baud Rate Display
Programming Steps
The SMDR Baud Rate is programmed using Flash 15, Baud Rate
Assignments. FLASH 21, Button #4 returns an error tone when pressed.
The LCD displays the current baud rate based on which port is assigned
to the SMDR Port number.
Description
The
connector on the optional MISU. The baud rate is displayed as 150, 300,
600, 1200, 2400, 4800, or 9600 baud.
determine the print format of SMDR records. This feature toggles on
and off each time the button is pressed. The display updates with
each toggle.
LED On= 80-Character is enabled
LED Off = 30-Character is enabled
Triad 1/2/3
System provides SMDR output to the standard RS-232C
Station Message Detail Recording (SMDR)
Advertisement
Table of Contents
