Toll Restriction
Toll Restriction
Entering Toll Table
Technical Manuals Online! - http://www.tech-man.com
Programming Steps
If the system is in the programming mode, continue using the program
codes. If starting to program here, enter the programming mode.
1. Press FLASH and dial [70]. The following message displays:
EX
TA BL ES
EN TE R B UT TON N U MB ER
2. To program Allow/Deny tables, press the appropriate Table button
and enter information as outlined in the following procedures.
3. To program Special Tables 1-3, it is necessary to associate an area
code to the table. This is done by pressing the appropriate AREA
CODE TABLE button and assign the area code.
Special Table 4 is reserved for the home area code and does not
require an area code entry.
4. To display entries in any of the tables, press the DISPLAY TABLES
button (FLASH 70, Button #12). Entries in the Allow/Deny tables
display two at a time. Entries in the Special tables display six at a time
in ascending order.
9-7