Caller ID Interface Unit Installation
Programming the KSU
I/O Ports
1. Verify the programming for the I/O ports, press
2. Select the desired I/O port, Button 1, 3, 4 (MPB, SIU1, SIU2).
3. Dial [5] on the dial pad and press HOLD.
CO Lines
1. Verify the programming for the CO Lines, press
2. Enter CO line Range for the Caller ID Unit and press HOLD.
3. Press Button 21 (Page C).
4. Press Button 2, Ring Delay Timer.
5. Enter 04 (minimum). Press HOLD.
6. Reset the system and the CTI box.
CO LINES
ICL ID
ICLID
Interface
Interface
Unit
Unit
RS232
STARPLUS
KSU
RS232
L AN
SERVER
Figure 2-32: CTI System Configuration
✳✳
3226, Flash 15.
✳✳
3226, Flash 40.
CTI
Module
CTI
Module
CTI
Module
L AN
2-77
LAN
LAN
L AN