Lcr Queuing (Automatic); Mailbox Buttons; Meet Me Page - Vodavi Triad-S 1-2-3 User Manual

Mailbox Buttons

LCR Queuing (Automatic)

1. Dial [9].
2. Dial the desired 7-digit telephone number (e.g., 1 + area
code + number).
3. Wait for answer.
Mailbox Buttons
To program a station's mailbox on a flexible button:
1. Press the desired flexible button to be programmed.
2. Dial [644] followed by the three-digit VM Index number
(001–255). A confirmation tone sounds. If an error is made
during entry, an error tone sounds.
To use a mailbox button:
The called station presses the MAILBOX flexible button
and goes on-hook. The internal or external call is then
transferred to the VM port by the telephone system.

Meet Me Page

To request another party meet you on a page:
1. Dial the desired two or three-digit paging code or press
the pre-programmed MEET ME flexible button.
2. Request that party meet you on the page.
3. Do not hang up; wait for the requested party to answer.
If all lines available to you are busy, remain off-hook
for four (4) seconds to automatically be queued onto
LCR for an available line.
❑
Flex
Btn
The VMID number must be pre-programmed in the
database (FLASH 68).
41