Executive Override Warning Tone - Vodavi STARPLUS Triad 1 System Programming Manual

2-26

Executive Override Warning Tone

Programming Steps
1. Press the EXEC OVER WARN TONE flex button (FLASH 05, Button #4).
2. Enter a valid number (0 or 1) that corresponds with the following
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The Executive Override Warning enables Executive stations to override
and barge-in on other key sets engaged in conversation on a CO line.
Prior to actual cut through of the third party, a warning tone is presented
to all parties notifying them of the barge-in. This warning tone, however,
is a programmable option on a system-wide basis, that either enables or
disables the tone. When the tone is disabled, no audible signal is
presented to the parties to signal the barge-in.
By default, Executive Override Warning Tone is enabled.
entries:
[0] = Disabled
[1] = Enabled
EXE CUT IV E WAR NI NG
EN AB LE D
Use of this feature when the Executive Override Warning Tone is
disabled may be interpreted as a violation of federal, state, or local laws,
and an invasion of privacy. Check applicable laws in your area before
intruding on calls using this feature.
A change in volume may occur on the CO line or intercom call after the
barge-in occurs. This feature also affects ACD Supervisor Barge-in
warning tone.
System Features 1 Programming
0- 1