Ring Mode; Speaker Mode - Vodavi Triad-S 1-2-3 User Manual

Answering Machine Emulation

Ring Mode

The pre-programmed flexible button flashes at 480 ipm red
while the caller is in your mailbox. You can press the flashing
button and the audio is broadcast over the speaker of the
keyset. The MUTE key is also enabled and the LED lights solid
red. When the call is ringing the station in the ring mode, the
display shows:

Speaker Mode

The VM message is broadcast over the speaker. The MUTE key
is enabled and the LED lights solid red. When the station is
monitoring the caller in VM, the display shows.
To leave caller in VM and turn off speaker:
1. Press the ON/OFF button.
2. Then perform one of the following options:
Continue to listen to the message being left without
taking action at the keyset. After leaving the VM
message, the pre-programmed button returns to solid
red and the keyset returns to idle.
-or-
Press the MUTE key to talk to the party leaving the
message. The station is still in the CONF mode at this
point and the caller can hear the VM and you.
-or-
Press the flexible button to pick up the call. When the
call is picked up, the voice mail system disconnects
from the call.
VM S CR EEN IN G R IN G
MMM D D Y Y
VM S CR EEN IN G
MMM D D Y Y
H H: MM a m
H H: MM a m
3