Fusing; Fusing Unit - Gestetner G060 Service Manual

FUSING

3.8 FUSING

CAUTION
1. Be careful when handling the fusing unit. It is very hot.
2. Take care not to spill silicone oil.

3.8.1 FUSING UNIT

1. Detach the finisher from the printer if it is installed.
2. Open the duplex inverter unit if it is installed.
3. Fusing unit [A]
After replacing the fusing unit, optimize the line speed for fusing unit by adjusting
the speed of development motor-K with the Maintenance menu in the user tools
"Menu/Maintenance/Color Regist./Fuser Adjust/At Unit Replace".
This mode is automatically required after the machine detects a new fusing unit is
installed. Refer to Maintenance Guide 1 of the Operating Instructions for how to
adjust this.
G060
[A]
3-28
G060R508.WMF
SM