TRANSFER AND PAPER TRANSPORT UNIT
16. Lay the transfer unit on its side. Grasp
the upper end of the transfer belt and
pull the transfer belt [Q] up and out.
17. When reinstalling the belt, check that
the end with the belt-lot number comes
to the rear side of the machine.
NOTE: 1) If the transfer charge brushes are dirty, clean them with a vacuum
cleaner.
2) If the drive rollers are dirty, clean them with a damp cloth.
3) When reassembling, check that the connector [R] is outside the transfer
belt.
After replacing the transfer belt, perform forced line position adjustment (SP5-993-
002 or 'Maintenance menu - Color registration - Auto Adjust' in User Program
mode).
G060
[R]
3-26
[Q]
SM