Ipv6 Mbgp Commands; Address Family Ipv6 Unicast - Dell Force10 S4810P Reference Manual

Defaults
Command Modes ROUTER BGP
Command History
Version 8.2.1.0
Version 7.4.1.0
Related neighbor timers
Commands

IPv6 MBGP Commands

Multiprotocol BGP (MBGP) is an enhanced BGP that enables the multicast routing policy throughout the Internet and
connecting multicast topologies between BGP and autonomous systems (AS). FTOS MBGP is implemented as per IETF
RFC 1858.

address family ipv6 unicast

This command changes the context to subsequent address family identifier (SAFI).
E-Series
Syntax address family ipv6 unicast
To remove SAFI context, use the no address family ipv6 unicast command.
Parameters
ipv6
unicast
Defaults IPv6 Unicast
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0
Usage All subsequent commands apply to this address family after you execute this command. You
Information can exit from this AFI/SAFI to the IPv6 Unicast (the default) family by entering exit and
returning to the Router BGP context.
• keepalive = 60 seconds
• holdtimer = 180 seconds
Introduced on the E-Series ExaScale.
Introduced
– adjusts BGP timers for a specific peer or peer group.
Enter the keyword ipv6 to specify the address family as IPv6.
Enter the keyword unicast to specify multicast as SAFI.
Introduced
537