Exec-Timeout - Dell S4810 Reference Manual

exec-timeout

Set a time interval that the system waits for input on a line before disconnecting the session.
S4810
Syntax
exec-timeout minutes [seconds]
To return to default settings, use the no exec-timeout command.
Parameters
minutes
seconds
Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds
Command LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage To remove the time interval, enter exec-timeout 0 0.
Information
Example
Dell con0 is now available
Press RETURN to get started.
Dell>
Control and Monitoring
Enter the number of minutes of inactivity on the system
before disconnecting the current session. The range is from
0 to 35791. The default is 10 minutes for the console line
and 30 minutes for the VTY line.
(OPTIONAL) Enter the number of seconds. The range is from
0 to 2147483. The default is 0 seconds.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
103