Ip Telnet Server Vrf - Dell S4810 Reference Manual

Defaults Enabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0
Related ip ssh server
Commands

ip telnet server vrf

Configures the TELNET server on either a specific VRF or a management VRF.
S4810
Syntax
ip telnet server vrf {management | vrf-name}
To undo the TELNET server configuration, use the no ip telnet server [vrf
vrf-name] command.
Parameters
vrf
management
vrf vrf-name
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant FTOS Command Line Reference Guide.
The following is a list of the FTOS version history for this command.
114
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enables the secure shell (SSH) server on the system.
Enter the keyword vrf followed by the keyword
management to specify a management VRF that is used by
the TELNET server.
Enter the keyword vrf and then the name of the VRF to
specify the VRF that is used by the TELNET server.
Control and Monitoring