Show Startup-Config - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

show startup-config

Display the startup configuration.

show startup-config

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

Version 7.5.1.0

Version 7.4.1.0

Dell#show startup-config

! Version 9-0(2-0)

! Last configuration change at Thu Apr 18 10:18:39 2013 by

! Startup-config last updated at Thu Apr 18 10:18:40 2013 by

boot system stack-unit 0 primary system: A:

boot system stack-unit 0 secondary tftp://10.16.127.35/Dell-

SI-9-0-2-0.bin

boot system stack-unit 0 default system: A:

boot system gateway 10.16.132.254

redundancy auto-synchronize full

redundancy disable-auto-reboot stack-unit

show running-config

File Management

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on S-Series

Introduced on the C-Series.

Expanded to include the last configuration change, start-up

last updated (date and time), and who made the change.

– displays the current (running) configuration.