Rename; Restore Factory-Defaults - Dell S4810 Reference Manual

rename

Rename a file in the local file system.
S4810
Syntax
rename url url
Parameters
url
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series

restore factory-defaults

Restore factory defaults.
S4810
Syntax
restore factory-defaults stack-unit {0-5 | all} {clear-all |
bootvar | nvram}
Parameters
factory-
defaults
72
Enter the following keywords and a filename:
• For a file on the internal Flash, enter flash:// followed
by the filename.
• For a file on an external USB drive, enter usbflash://
followed by the filename.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on S-Series
Introduced on C-Series
Original command
Return the system to its factory default mode.
File Management