Pre-Ringing Setup - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-08 : Pre-Ringing Setup to enable or disable pre-ringing for trunk
calls. This sets how a trunk initially rings a telephone. With pre-ringing, a burst of
ringing occurs as soon as the trunk LED flashes. The call then continues ringing with
the normal ring cadence cycle. Without pre-ringing, the call starts ringing only when
the normal ring cadence cycle occurs. This may cause a ring delay, depending on
when call detection occurs in reference to the ring cycle.
Feature Cross Reference


2 - 20
Input Data
Item No. Description
01 Pre-Ringing
Conditions
Used with Analog Trunks only.

Central Office Calls, Answering
Synchronous Ringing

10-08 : Pre-Ringing Setup

Input Data
0 = No
1 = Yes
Program 10 : System Configuration Setup
UNIVERGE SV8100
Default
0