Tie Line Tandem Switching; Timed Queue; Timed Reminder; Trunk - Direct Appearances - NEC NEAX2000 IVS2 General Description Manual

Tie Line Tandem Switching

Tie Line Tandem Switching

Timed Queue

Timed Reminder

Trunk - Direct Appearances

Trunk Queuing - Outgoing

Trunk-to-Trunk Connection

Page 70
This feature allows trunk-to-trunk connections through the NEAX2000 IVS
the need for any Attendant assistance or control. The major use of this feature is in
association with a dial tandem tie line network to allow tie line connections and
incoming tie line calls automatic access to, and completion of, local Central Office
calls.
When a user originates an outgoing trunk call and the called party is busy or does not
answer, the caller can set the Timed Queue feature. When this feature is set, the trunk
seizure is repeated and the number is redialed after a predetermined time interval.
This feature allows the system to be programmed to automatically call stations at
specified times. Upon answering, the station is connected to a recorded announcement
or music source.
This feature allows Multiline Terminal users the ability to access a CO line or E&M
Tie Line without dialing an access code. For this feature, trunks must be assigned to
the line keys on the Multiline Terminal. Incoming calls on CO lines can be answered
on the appropriate trunk line appearance.
This allows a station user, upon encountering a busy signal on a trunk, to dial a feature
access code and enter a first-in, first-out queue. As soon as an outgoing trunk becomes
available, stations in the queue will be called back on a first-in, first-out basis.
This feature provides any station user with the ability to conference together two
outside trunk calls and abandon the connection without dropping the Trunk-to-Trunk
Connection.
Chapter 5 Feature Description
2
NEAX2000 IVS General Description
NDA-24293, Issue 2
2
without