Tandem Connection Programming - NEC Neax 2000 IVS2 Manual

Tandem Connection Programming

• When providing Tandem Connection (ISDN to CCIS/CCIS to ISDN), do the following
programming:
START
Specify the combination of trunk routes
CM36
allowing the tandem connection.
NOTE: The Home-Side Virtual Tie line
routes must be included for all
Tandem combinations.
Tandem connection by station or
CM08
attendant.
END
2
NEAX2000 IVS ISDN System Manual
ND-70919 (E), Issue 1.0
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
Y=0
•
(1) XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ: 00-63: Outgoing Trunk Route
(2) 0 : Allowed
1 : Restricted
(1) 028
(2) 0 : Available
1 : Not available
DATA
Page 135