Malfunction In Deceleration Sensor - Toyota T100 1996 Service Manual

DI−350
DTC
CIRCUIT DESCRIPTION
DTC No.
Either of following 1 or 2 is detected:
1. After the battery terminal is connected, input from the
deceleration sensor does not change at one cycle (0
km/h → more than 30 km/h → 0 km/h) for 16 times con-
43
tinuously.
2. When the brake pedal is not depressed at vehicle speed
of 5 km/h or more, forward and backward G (more than
0.4 G) is detected for 30 seconds or more.
INSPECTION PROCEDURE
1 Check deceleration sensor (See page DI−321).
OK
2 Check for open or short in harness and connector between sensor and ECU
(See page IN−26).
OK
Check and replace ABS ECU.
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS
43

Malfunction in Deceleration Sensor

DTC Detecting Condition
− ANTI−LOCK BRAKE SYSTEM
S Deceleration sensor
S Wire harness for deceleration sensor system
S ECU
NG Replace deceleration sensor.
NG Repair or replace harness or connector.
Trouble Area
DI10K−01