DI−388
5
Check harness between center airbag sensor assembly and spiral cable.
Center Airbag
Sensor Assembly
Spiral
Cable
D−
D+
(−)
OK
6
Check spiral cable.
OK
From results of above inspection, malfunctioning part can now be considered normal. To make
sure of this, use simulation method to check.
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS
PREPARATION:
Using a service wire, connect D+ and D− on center airbag sen-
D Squib
sor assembly side connector.
CHECK:
For the connector (on the center airbag sensor assembly side)
between the center airbag sensor assembly and spiral cable,
measure the resistance between D+ and D−.
OK:OK:
(+)
NG
H18112
NG
−
SUPPLEMENTAL RESTRAINT SYSTEM
Resistance: Below 1 Ω
Repair or replace harness or connector be-
tween center airbag sensor assembly and spiral
cable.
Repair or replace spiral cable.