Toyota T100 1996 Service Manual page 653

7 Check center airbag sensor assembly.
D Squib
Spiral
Cable
D− D+
DLC1
E1 Tc
H01002 AB0069
AB0118
AB0119
R13006 W02044
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS
CHECK:
(a)
Airbag
(b)
Sensor
Assembly
(c)
(d)
ACC ON
(e)
or
(f)
DTC 14 OK:
HINT:
Codes other than code 14 may be output at this time, but they
are not relevant to this check.
NG
H01140
− SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to ACC or ON and wait at least 20 se-
conds.
Clear malfunction code stored in memory (See page
DI−365).
Turn ignition switch to LOCK, and wait at least 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least 20 se-
conds.
Using SST, connect terminals Tc and E
SST 09843−18020
Check DTC.
DTC 14 is not output.
Replace center airbag sensor assembly.
DI−389
of DLC1.
1