This chapter describes the Internet Protocol (IP) configuration set of commands and how to use
them.
ROUTER: The commands covered in this chapter can be executed when the device is
in router mode only. For details on how to enable router configuration modes, refer to
Section
3.3.3.
12.1 PROCESS OVERVIEW: INTERNET PROTOCOL (IP)
CONFIGURATION
Use the following steps as a guide to configuring IP on the device:
1. Configuring routing interface settings
2. Reviewing and saving the routing configuration
3. Reviewing and configuring the ARP table
4. Reviewing and configuring broadcast settings
5. Reviewing IP traffic and configuring routes
(Section
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
IP Configuration
12.2.3)
(Section
12.2.2)
(Section
12.2.3)
(Section
12.2.4)
(Section
12.2.5)
12
12-1