Clear Nodealias Config - Enterasys 1G58x-09 Configuration Manual

11.2.5.6 clear nodealias config

Use this command to reset node alias state to enabled and clear the maximum entries value.
clear nodealias config
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the node alias configuration
Matrix>clear nodealias config
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Logging and Network Management Command Set
:
Configuring Node Aliases
11-73