Table of Contents
Advertisement
6.2.1.7
set spantree msti
Use this command to create or delete a Multiple Spanning Tree instance.
set spantree msti sid {create | delete}
Syntax Description
sid
create | delete
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create MST instance 2:
Matrix>set spantree msti 2 create
6.2.1.8
clear spantree msti
Use this command to delete one or more Multiple Spanning Tree instances.
clear spantree msti [sid]
Syntax Description
sid
Command Defaults
If sid is not specified, all MST instances will be cleared.
Reviewing and Setting Spanning Tree Bridge Parameters
Sets the Multiple Spanning Tree ID. Valid values are 1 -
4094.
NOTE: Matrix E1 devices will support up to 16
MST instances.
Creates or deletes an MST instance.
(Optional) Deletes a specific multiple Spanning Tree ID.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Spanning Tree Configuration Command Set
6-13
Advertisement
Table of Contents
