Logging and Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
11.2.4 Configuring Simple Network Time Protocol (SNTP)
Purpose
To configure the Simple Network Time Protocol (SNTP), which synchronizes device clocks in a
network. For other time-related commands, see
on
page
3-30.
Commands
Commands to configure SNTP are listed below and described in the associated section as shown.
•
show sntp
(Section
•
set sntp client
(Section
•
set sntp broadcastdelay
•
set sntp poll-interval
•
set sntp server
(Section
•
clear sntp server
•
set timezone
(Section
•
clear timezone
(Section
11.2.4.1 show sntp
Use this command to display SNTP settings.
show sntp
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
11-60
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.4.1)
11.2.4.2)
(Section
11.2.4.3)
(Section
11.2.4.4)
11.2.4.5)
(Section
11.2.4.6)
11.2.4.7)
11.2.4.8)
Section
3.2.2,
"Setting Basic Device
Properties,"