Table of Contents
Advertisement
Process Overview: Routing Protocol Configuration
Configuring OSPF
Table 13-5 show ip ospf neighbor Output Details
Output
ID
Pri
State
Dead-Int
Address
Interface
13.1.2.28show ip ospf virtual-links
Use this command to display information about the virtual links configured on a router. A virtual
link represents a logical connection between the backbone and a non-backbone OSPF area.
show ip ospf virtual-links
Syntax Description
None.
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
None.
13-60
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
What It Displays...
Neighbor's router ID of the OSPF neighbor.
Neighbor's priority over this interface.
Neighbor's OSPF communication state.
Interval (in seconds) this router will wait without receiving a
Hello packet from a neighbor before declaring the neighbor
is down.
Neighbor's IP address.
Neighbor's interface (VLAN).
Advertisement
Table of Contents
