Table of Contents
Advertisement
Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Example
This example shows how to set the LAN attached to Fast Ethernet front panel port 3 as a
point-to-point segment:
Matrix>set spantree adminpoint fe.0.3 true
6.2.2.27 clear spantree adminpoint
Use this command to resets the point-to-point admin status to "auto" on one or more ports.
clear spantree adminpoint [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, point-to-point status will be reset on all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the point-to-point status of the LAN segment attached to Fast
Ethernet front panel port 3 to auto:
Matrix>clear spantree adminpoint fe.0.3
6-56
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
(Optional) Resets point-to-point status on specific port(s).
For a detailed description of possible port-string values,
refer to
Section
4.1.2.
Advertisement
Table of Contents
