Table of Contents
Advertisement
Port Configuration Command Set
Setting Port Auto-Negotiation and Advertised Ability
4.3.5.2
set port negotiation
Use this command to enable or disable auto-negotiation on one or more ports.
set port negotiation port-string {enable | disable}
Syntax Description
port-string
enable | disable |
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable auto-negotiation on Fast Ethernet front panel port 11:
Matrix>set port negotiation fe.0.11 disable
4-22
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies the port(s) for which to enable or disable
auto-negotiation. For a detailed description of possible
port-string values, refer to
Enables or disables auto-negotiation.
Section
4.1.2.
Advertisement
Table of Contents
