Table of Contents
Advertisement
9.3.1.1
show port priority
Use this command to display the 802.1p priority for one or more ports.
show port priority [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, port priority for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the port priority for the Fast Ethernet expansion module 3, port
11. In this case, the priority is 5:
Matrix>show port priority fe.3.11
Port fe.3.11 has port priority of 5.
9.3.1.2
set port priority
Use this command to set the 802.1D transmit queue priority (0 through 7) on each port. A port
receiving a frame without priority information in its tag header is assigned a priority according to
the priority setting on the port. For example, if the priority of a port is set to 5, the frames received
through that port without a priority indicated in their tag header are classified as a priority 5.
A frame with priority information in its tag header is transmitted according to that priority.
set port priority port-string priority
Port Priority and Classification Configuration Commands
(Optional) Displays priority information for specific
port(s). For a detailed description of possible port-string
values, refer to
Section
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Configuring Port Priority
4.1.2.
9-5
Advertisement
Table of Contents
