Table of Contents
Advertisement
Security Configuration Command Set
Configuring MAC Locking
14.3.4.16clear maclock autostatic
Use this command to clear the MAC locking autostatic configuration(s) on one or more ports.
clear maclock autostatic [port-string] | [isl port-string | publicmac | publicvlan
{egress | ingress} | passthroughmac]
Syntax Description
isl port-string
publicmac
publicvlan egress |
ingress
passthroughmac
port-string
Command Defaults
If no arguments are specified, all autostatic configurations will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the MAC locking autostatic function on Fast Ethernet front panel
port 3 back to the default state of disabled:
Matrix>clear maclock autostatic fe.0.3
14-60
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Resets autolearning of the autostatic public VLAN back
to the default state of disabled for one or more ports.; ; or
clears the public VLAN ID on specified ports.
Clears the autostatic public MAC address.
Clears the autostatic public egress or ingress VLAN.
Clears the MAC multicast pass through address.
(Optional when isl is not specified.) Clears/resets the
MAC locking autostatic configuration on specific port(s).
For a detailed description of possible port-string values,
refer to
Section
4.1.2.
Advertisement
Table of Contents
