SNMP Command Set
Configuring SNMP Users, Groups and Communities
5.2.2.9
clear community
Use this command to delete an SNMPv1 or v2 community name.
clear community community_name
Syntax Description
community_name
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete the community name "green."
Matrix>clear community green
5.2.2.10 show snmp community
Use this command to display the mapping of SNMPv1and v2 community names to SNMPv3 access
policies.
show snmp community [name]
Syntax Description
name
Command Defaults
If name is not specified, information will be displayed for all SNMP communities.
Command Type
Switch command.
5-24
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies the SNMP management user access name to be
deleted.
(Optional) Displays SNMP information for a specific
community name.