Show Ip Ospf - Enterasys 1G58x-09 Configuration Manual

Command Syntax of the "no" Form
The "no" form of this command removes the database overflow limits:
no database-overflow external {[exit-overflow-interval interval] [limit limit]
[warning-level level]}
Command Type
Router command.
Command Mode
Router configuration: Matrix->Router(config-router)#
Command Defaults
None.
Example
This example shows how to set the OSPF database exit overflow interval to 240 seconds, the
overflow limit to 3800 LSAs, and the warning level to 2500 LSAs:
Matrix>Router(config)#router ospf 1
Matrix>Router(config-router)#database-overflow external exit-overflow-interval
240
Matrix>Router(config-router)#database-overflow external limit 3800
Matrix>Router(config-router)#database-overflow external warning-level 2500

13.1.2.23show ip ospf

Use this command to display OSPF information.
show ip ospf
Syntax Description
None.
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Process Overview: Routing Protocol Configuration
Configuring OSPF
13-51