Set Vlan Egress - Enterasys 1G58x-09 Configuration Manual

Enterasys network device configuration guide

Table of Contents

VLAN Configuration Command Set

Configuring the VLAN Egress List

This example shows you how to show VLAN egress information for front panel Fast Ethernet ports

1 through 3. In this case, all three ports are allowed to transmit VLAN 1 frames as tagged and

VLAN 10 frames as untagged. Both are static VLANs:

Matrix>show port egress fe.0.1-3

-------------------------------------------------------

set vlan egress

Use this command to add ports to one or more VLAN egress lists for the device. This determines

which ports will transmit frames for a particular VLAN.

set vlan egress vlan-list port-string [untagged]

Syntax Description

Command Defaults

If untagged is not specified, the port will be added to the VLAN egress list as able

to transmit 802.1Q tagged frames.

Command Type

Switch command.

Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide

Specifies the VLAN(s) where port(s) will be added to the

egress list.

Specifies port(s) to add to the VLAN egress list of the

specified vlan-id. For a detailed description of possible

port-string values, refer to

(Optional) Adds the specified ports as untagged ports. This

allows the port to transmit frames that do not include an

IEEE 802.1Q header tag.

Registration