Security Configuration Command Set
Configuring Secure Shell (SSH)
14.3.6.4 set ssh ciphers
Use this command to set the cipher name(s) used for SSH encryption.
set ssh ciphers {all | anycipher | anystdcipher | ciphername}
Syntax Description
all
anycipher
anystdcipher
ciphername
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the cipher name used for SSH encryption to "blowfish-cbc
Matrix>set ssh cipher blowfish-cbc
14-82
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Specifies that all supported ciphers will be allowed.
Specifies that all server-supported ciphers will be allowed.
Specifies that the subset of server and IETF-supported
ciphers will be allowed.
Specifies a user-named cipher. Valid values are:
•
aes128-cbc
•
3des-cbc
•
blowfish-cbc
•
twofish128-cbc
•
cast128-cbc
•
arcfour
":