Table of Contents
Advertisement
Command Mode
Read-Write.
Example
This example shows how to delete the SNMP notify filter "pilot1":
Matrix>clear snmp notifyfilter pilot1 subtree 1.3.6
5.2.7.12 show snmp notifyprofile
Use this command to display SNMP notify profile information. This associates target parameters to
an SNMP notify filter to determine who should not receive SNMP notifications.
show snmp notifyprofile [profile] [targetparam targetparam]
Syntax Description
profile
targetparam
targetparam
Command Defaults
If no parameters are specified, all notify profile information will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SNMP notify information for the profile named "area51":
Matrix>show snmp notifyprofile area51
--- SNMP notifyProfile information ---
Notify Profile
TargetParam
Storage type
Row status
(Optional) Displays a specific notify profile.
(Optional) Displays entries for a specific target
parameter.
= area51
= v3ExampleParams
= nonVolatile
= active
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
SNMP Command Set
Configuring SNMP Notification Parameters
5-59
Advertisement
Table of Contents
