Set Policy Port - Enterasys 1G58x-09 Configuration Manual

Enterasys network device configuration guide

Table of Contents

Policy Classification Configuration Command Set

Assigning Ports to Policy Profiles

This example shows how to display policy information for Fast Ethernet front panel port 21. In this

case, the port is allowed to transmit untagged frames to policy profile 1 based on the classification

rules assigned to that policy:

Matrix>show policy port fe.0.21

--------------------------

set policy port

Use this command to assign ports to a policy profile. Ports assigned will now be active for this

profile. Untagged frames received will be tagged according to the policy profile settings.

set policy port port-string admin-id

Syntax Description

Command Defaults

Command Type

Switch command.

Command Mode

This example shows how to allow Fast Ethernet front panel ports 5 through 15 to classify frames

according to policy profile 5:

Matrix>set port policy fe.0.5-15 5

Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide

Specifies the port(s) to add to the policy profile. For a

detailed description of possible port-string values, refer

Specifies the ID of the policy profile (role) to which the

port(s) will be added.