Table of Contents
Advertisement
General Configuration Command Set
Configuring Enterasys and Cisco Discovery Protocols
Table 3-8 show port ciscodp info Output Details (Continued)
Output
VVID
#Neigh
PDU-TX
PDU-RX
CosExt
TrustExt
3.2.6.10 show port ciscodp neighborinfo
Use this command to display information about neighboring Cisco devices on one or more ports.
show port ciscodp neighborinfo [details] [port-string]
Syntax Description
details
port-string
Command Defaults
•
•
Command Type
Switch command.
3-78
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
What It Displays...
Whether a Voice VLAN ID has been set on this port. Default
of none can changed using the set port ciscodp vvid
command
Number of neighboring Cisco devices detected on this port.
Number of Cisco DP PDUs transmitted on this port.
Number of Cisco DP PDUs received on this port.
Whether or not a Cisco DP Class of Service has been
defined for this port. Default of undefined can be changed
using the set port ciscodp cos-ext command
(Section
Whether or not a trusted status has been defined for this port.
Default of undefined can be changed using the set port
ciscodp trust-ext command
(Optional) Displays detailed information.
(Optional) Displays information about specific port(s). For
a detailed description of possible port-string values, refer to
Section
If details is not specified, summary information will be displayed.
If port-string is not specified, Cisco DP information will be displayed for all
ports.
(Section
3.2.6.14).
3.2.6.13).
4.1.2.
(Section
3.2.6.12).
Advertisement
Table of Contents
