Table of Contents
Advertisement
Syntax Description
None.
Command Syntax of the "no" Form
The "no" form of this command removes all VRRP configurations from the
running configuration:
no router vrrp
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router(config)#
Command Defaults
None.
Example
This example shows how enable VRRP configuration mode:
Matrix>Router#configure terminal
Matrix>Router(config)#router vrrp
Matrix>Router(config-router)#
13.1.5.2 create
Use this command to create a VRRP session.
create vlan vlan_id vrid
NOTE: This command must be executed to create an instance of VRRP on a routing
interface (VLAN) before any other VRRP settings can be configured.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Process Overview: Routing Protocol Configuration
Configuring VRRP
13-77
Advertisement
Table of Contents
