Process Overview: Snmp Configuration - Enterasys 1G58x-09 Configuration Manual

Table 5-1 SNMP Security Levels
Model Security Level
v1 NoAuthNoPriv
v2 NoAuthNoPriv
v3 NoAuthNoPriv
AuthNoPriv
authPriv
5.1.4

Process Overview: SNMP Configuration

NOTE: Commands for configuring SNMP on the Matrix E1 Series device are
independent during the SNMP setup process. For instance, target parameters can be
specified when setting up optional notification filters — even though these parameters
have not yet been created with the set snmp targetparams command. The following
steps are a guideline to configuring SNMP and do not necessarily need to be executed
in this order.
Use the following steps as a guide to configuring SNMP on the device:
1. Disabling / enabling and reviewing SNMP statistics
2. Configuring SNMP users, groups and communities
3. Configuring SNMP access rights
4. Configuring SNMP MIB views
5. Configuring SNMP target parameters
Authentication
Community
string
Community
string
User name
MD5
MD5
(Section 5.2.3)
(Section 5.2.4)
(Section 5.2.5)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
SNMP Configuration Summary
Process Overview: SNMP Configuration
Encryption How It Works
None Uses a community string
match for authentication.
None Uses a community string
match for authentication.
None Uses a user name match for
authentication.
None Provides authentication based
on the HMAC-MD5
algorithm.
DES Provides authentication based
on the HMAC-MD5
algorithm. Provides DES
56-bit encryption in addition
to authentication based on the
CBC-DES (DES-56) standard.
(Section 5.2.1)
(Section 5.2.2)
5-3