11.2.3.1 show arp
Use this command to display the switch's ARP table.
show arp
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the ARP table:
Matrix>show arp
LINK LEVEL ARP TABLE
destination
--------------------------------------------------------------------------
10.1.0.1
10.1.10.10
--------------------------------------------------------------------------
11.2.3.2 set arp
Use this command to add mapping entries to the switch's ARP table.
set arp ip_address mac_address [temp] [pub] [trail]
gateway
00:00:1d:bc:df:bf
00:00:1d:1f:27:26
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Logging and Network Management Command Set
Managing Switch Network Addresses
flags
Refcnt
Use
405
1
405
0
Interface
0
host0
11338
host0
11-35