•
set flowlimit notification
•
set flowlimit clearstats
14.3.9.1 show flowlimit
Use this command to display flow setup throttling information.
show flowlimit [limit] [[port] [port-string]] [[stats] [port-string]]
Syntax Description
limit
port port-string
stats port-string
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no optional parameters are specified, detailed flow limiting information will be
displayed for all ports.
(Section
14.3.9.7)
(Section
14.3.9.8)
(Optional) Displays flow limits and actions.
(Optional) Displays flow limiting port settings for one or
all ports.
(Optional) Displays flow limiting statistics for one or all
ports.
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-103